Mercurial > hg > Members > kono > nitros9-code
comparison 3rdparty/packages/uucpbb/sample_config/Dialers @ 1767:8195955a5493
Config files added
| author | boisy |
|---|---|
| date | Fri, 01 Apr 2005 17:35:52 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 1766:2b34da8585c4 | 1767:8195955a5493 |
|---|---|
| 1 # Dialers file - UUCPbb v2.1 | |
| 2 # | |
| 3 # Format: | |
| 4 # <dialer_name> "" <modem_reset> <expect1> <modem_dial> <expect2> | |
| 5 # | |
| 6 # Notes | |
| 7 # - Lines starting with #, <space>, <tab> or <cr> character are considered | |
| 8 # comment lines and ignored. | |
| 9 # - <dialer_name> is referenced by the fifth (last) field of the Devices | |
| 10 # file. | |
| 11 # - The second field is always an empty string, i.e. "" or a '-' | |
| 12 # - <modem_reset> is the string we send to our modem to reset it. On a | |
| 13 # Hayes compatible modem this is usually ATZ or ATZ0. | |
| 14 # - <expect1> response message from the modem. On a Hayes compatible modem | |
| 15 # this is often 'OK'. If a pair of double quotes ("") is used, no | |
| 16 # response is expected. Any received is ignored. | |
| 17 # - <modem_dial> is the commands necessary to actually dial the remote. | |
| 18 # - \T tells uucico to insert the phone number given in the Systems file at | |
| 19 # this point. | |
| 20 # - <expect2> response message the modem sends when the two modems are | |
| 21 # finally connected and ready to go. On Hayes compatible modems this | |
| 22 # is usually 'CONNECT xxx'. The string 'CONNECT' is sufficient. | |
| 23 # - When a direct physical connect (no modem) is used between machines, | |
| 24 # fields 2 through 6 are empty strings, i.e. pair of double quotes (""), | |
| 25 # or dash (-) | |
| 26 | |
| 27 hayes "" ATZ OK ATDT\T CONNECT | |
| 28 zoom_mnp5 "" ATZ1 OK ATMS0=0S11=50%C1 OK AT\\N3N1DT\T CONNECT | |
| 29 direct "" "" "" "" "" | |
| 30 direct2 - - - - - |