--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/level1/modules/term_scdwt.asm	Thu Dec 24 01:57:55 2009 +0000
@@ -0,0 +1,66 @@
+********************************************************************
+* TERM - Drivewire Virtual Serial Port on T0
+*
+* mostly copied or slightly changed from other OS9/DriveWire code
+*
+* Aaron Wolfe
+* version 0.3 - 12/17/09  - added SHARE bit to mode
+*
+* This descriptor has slightly different defaults, intended to be used as 
+* the channel for the DriveWire utilities
+*
+
+         nam   TERM
+         ttl   CoCo DriveWire Virtual Serial Device Descriptor
+
+         ifp1  
+         use   defsfile
+         endc  
+
+tylg     set   Devic+Objct
+atrv     set   ReEnt+rev
+rev      set   $00
+
+         mod   eom,name,tylg,atrv,mgrnam,drvnam
+
+         fcb   UPDAT.+SHARE.    	mode byte (share set to prevent multiple access)
+         fcb   HW.Page    extended controller address
+         fdb   $FF00      physical controller address
+         fcb   initsize-*-1 initilization table size
+         fcb   DT.SCF     device type:0=scf,1=rbf,2=pipe,3=scf
+         fcb   $00        case:0=up&lower,1=upper only
+         fcb   $00        backspace:0=bsp,1=bsp then sp & bsp
+         fcb   $01        delete:0=bsp over line,1=return
+         fcb   $00        echo:0=no echo
+         fcb   $00        auto line feed:0=off
+         fcb   $00        end of line null count
+         fcb   $00        pause:0=no end of page pause
+         fcb   66         lines per page
+         fcb   C$BSP      backspace character
+         fcb   C$DEL      delete line character
+         fcb   $00        end of record character
+         fcb   $00        end of file character
+         fcb   C$RPRT     reprint line character
+         fcb   C$RPET     duplicate last line character
+         fcb   C$PAUS     pause character
+         fcb   $00        interrupt character
+         fcb   $00        quit character
+         fcb   C$BSP        backspace echo character
+         fcb   C$BELL     line overflow character (bell)
+         fcb   $00        init value for dev ctl reg
+         fcb   B600       baud rate
+         fdb   name       copy of descriptor name address
+         fcb   $00        acia xon char
+         fcb   $00        acia xoff char
+         fcb   80         (szx) number of columns for display
+         fcb   24         (szy) number of rows for display
+initsize equ   *
+
+name     fcs   /Term/
+mgrnam   fcs   /SCF/
+drvnam   fcs   /scdwt/
+
+         emod  
+eom      equ   *
+         end   
+