Mercurial > hg > Members > kono > nitros9-code
view lib/systype.a @ 2721:06d492093592 lwtools-port
Fixed echo problem with TCPOpen now always turning echo off
| author | Boisy Pitre <boisy.pitre@nuance.com> |
|---|---|
| date | Thu, 26 Jul 2012 13:37:49 -0500 |
| parents | 39d0df63f56d |
| children | aaba193af04f |
line wrap: on
line source
******************************************************************** * SysType - NitrOS-9 System Specific Definitions * * $Id$ * * Edt/Rev YYYY/MM/DD Modified by * Comment * ------------------------------------------------------------------ * 1998/10/13 Boisy G. Pitre * Added defs by Bruce Isted from his Eliminator archive. * * 1998/10/31 Boisy G. Pitre * Merged cc3global.defs into this file. * * 2002/04/30 Boisy G. Pitre * Merged Level One and Level Two sysdefs. * * 2002/06/22 Boisy G. Pitre * Removed PIA.U4 and PIA.U8, improved comments * * 2003/11/05 Robert Gault * Made changes in window globals and grfdrv memory to handle regW * in 6809 systems. * * 2003/11/30 Boisy G. Pitre * Statics now are prefaced with V. to identify them easier in source. * * 2004/07/18 Boisy G. Pitre * Moved CoCo 3 Window stuff into cc3iodefs NAM SysType IFEQ Level-1 TTL NitrOS-9 Level 1 System Type Definitions ELSE IFEQ Level-2 TTL NitrOS-9 Level 2 System Type Definitions ENDC IFEQ Level-3 TTL NitrOS-9 Level 3 System Type Definitions ENDC ENDC ********************** * CPU Type Definitions * Color: SET 1 Color3: SET 2 IFEQ Level-1 CPUType: SET Color ELSE CPUType: SET Color3 ENDC ****************************** * Clock Speed Type Definitions * OneMHz: EQU 1 TwoMHz: EQU 2 IFEQ CPUType-Color CPUSpeed: SET OneMHz ELSE CPUSpeed: SET TwoMHz ENDC ********************************** * Power Line Frequency Definitions * Hz50: EQU 1 Assemble clock for 50 hz power Hz60: EQU 2 Assemble clock for 60 hz power PwrLnFrq: SET Hz60 Set to Appropriate freq ********************************** * Ticks per second * IFEQ PwrLnFrq-Hz50 TkPerSec: SET 50 ELSE TkPerSec: SET 60 ENDC ****************** * ACIA type set up * csect ACIA6850: RMB 1 MC6850 acia. ACIA6551: RMB 1 SY6551 acia. ACIA2661: RMB 1 SC2661 acia. ACIATYPE: SET ACIA6551 endsect **************************************** * Special character Bit position equates * SHIFTBIT: EQU %00000001 CNTRLBIT: EQU %00000010 ALTERBIT: EQU %00000100 UPBIT: EQU %00001000 DOWNBIT: EQU %00010000 LEFTBIT: EQU %00100000 RIGHTBIT: EQU %01000000 SPACEBIT: EQU %10000000 ****************** * Device addresses for miscellaneous hardware * A.AciaP: SET $FF68 Aciapak Address A.ModP: SET $FF6C ModPak Address DPort: SET $FF40 Disk controller base address MPI.Slct: SET $FF7F Multi-Pak slot select MPI.Slot: SET $03 Multi-Pak default slot PIA0Base: EQU $FF00 PIA1Base: EQU $FF20 ****************** * VDG Devices * A.TermV: SET $FFC0 VDG Term A.V1: SET $FFC1 Possible additional VDG Devices A.V2: SET $FFC2 A.V3: SET $FFC3 A.V4: SET $FFC4 A.V5: SET $FFC5 A.V6: SET $FFC6 A.V7: SET $FFC7 IFEQ Level-1 ************************************************* * * NitrOS-9 Level 1 Section * ************************************************* HW.Page: SET $FF Device descriptor hardware page ELSE ************************************************* * * NitrOS-9 Level 2 Section * ************************************************* **************************************** * Dynamic Address Translator Definitions * DAT.BlCt: EQU 8 D.A.T. blocks/address space DAT.BlSz: EQU (256/DAT.BlCt)*256 D.A.T. block size DAT.ImSz: EQU DAT.BlCt*2 D.A.T. Image size DAT.Addr: EQU -(DAT.BlSz/256) D.A.T. MSB Address bits DAT.Task: EQU $FF91 Task Register address DAT.TkCt: EQU 32 Number of DAT Tasks DAT.Regs: EQU $FFA0 DAT Block Registers base address DAT.Free: EQU $333E Free Block Number DAT.BlMx: EQU $3F Maximum Block number DAT.BMSz: EQU $40 Memory Block Map size DAT.WrPr: EQU 0 no write protect DAT.WrEn: EQU 0 no write enable SysTask: EQU 0 Coco System Task number IOBlock: EQU $3F ROMBlock: EQU $3F IOAddr: EQU $7F ROMCount: EQU 1 number of blocks of ROM (High RAM Block) RAMCount: EQU 1 initial blocks of RAM MoveBlks: EQU DAT.BlCt-ROMCount-2 Block numbers used for copies BlockTyp: EQU 1 chk only first bytes of RAM block ByteType: EQU 2 chk entire block of RAM Limited: EQU 1 chk only upper memory for ROM modules UnLimitd: EQU 2 chk all NotRAM for modules * NOTE: this check assumes any NotRAM with a module will * always start with $87CD in first two bytes of block RAMCheck: EQU BlockTyp chk only beg bytes of block ROMCheck: EQU Limited chk only upper few blocks for ROM LastRAM: EQU IOBlock maximum RAM block number *************************** * Color Computer 3 Specific * MappedIO: EQU true (Actually False but it works better this way) ******************** * Hardware addresses * GIMERegs: EQU $FF00 Base address of GIME registers IrqEnR: EQU $FF92 GIME IRQ enable/status register BordReg: EQU $FF9A Border color register PalAdr: EQU $FFB0 Palette registers HW.Page: SET $07 Device descriptor hardware page ENDC