Mercurial > hg > Members > kono > nitros9-code
view level1/cmds/inetd.as @ 2824:1647f1874cdf lwtools-port
Added Kreidier C library
| author | Boisy Pitre <boisy.pitre@nuance.com> |
|---|---|
| date | Thu, 23 May 2013 05:49:13 -0500 |
| parents | d660d443fe5f |
| children |
line wrap: on
line source
******************************************************************** * inetd - internet daemon * * $Id$ * * Edt/Rev YYYY/MM/DD Modified by * Comment * ------------------------------------------------------------------ * 1 2010/01/08 Boisy G. Pitre * Started. * * 2 2010/01/22 Boisy G. Pitre * Now reads inetd.conf file. * * 3 2011/08/07 Boisy G. Pitre * Fixed bug where conf file wasn't being processed correctly. nam inetd ttl internet daemon section __os9 type equ Prgrm lang equ Objct attr equ ReEnt rev equ $00 edition equ 3 stack equ 200 endsect section bss targetport rmb 2 netdatardy rmb 1 nbufferl equ 128 nbuffer rmb nbufferl lbufferl equ 128 lbuffer rmb lbufferl nnext rmb 2 token rmb 2 orgstdin rmb 1 orgstdout rmb 1 orgstderr rmb 1 childnetpath rmb 1 netpath rmb 1 targetprog rmb 128 targetparams rmb 128 tmodeparamlen rmb 1 tmodeparams rmb 128 endsect section code DEBUG equ 1 NetSig equ 2 tmode fcs /tmode/ * signal intercept routine sigint cmpb #NetSig bne sigex inc netdatardy,u sigex rti **** Entry Point **** __start * setup signal intercept leax sigint,pcr os9 F$Icpt clr netdatardy,u leax nbuffer,u stx nnext,u * Turn off pause in standard out ldd #$01*256+SS.Opt leas -32,s tfr s,x os9 I$GetStt bcs opterr clr PD.PAU-PD.OPT,x os9 I$SetStt opterr leas 32,s * open the path to the control channel lbsr TCPOpen lbcs errex sta netpath,u leax SetupPorts,pcr lbsr ProcInetd lbcs errex IFNE DEBUG lbsr PRINTS fcc /Got netpath and setup ports/ fcb C$CR fcb $00 ENDC ssignetpath IFNE DEBUG lbsr PRINTS fcc /SS.SSig on NetPath/ fcb C$CR fcb $00 ENDC lda netpath,u ldb #SS.SSig send signal on data ready ldx #NetSig os9 I$SetStt lbcs errex **** MAIN LOOP **** mainloop pshs cc orcc #IntMasks tst netdatardy,u bne gotdata * wait for a child to die (or wake up via signal) os9 F$Wait bcc chkrdy cmpb #E$NoChld bne chkrdy got error other than "no children" * if no children, go to sleep ldx #$0000 os9 F$Sleep chkrdy puls cc bra ssignetpath gotdata puls cc dec netdatardy,u * read the data from netpath IFNE DEBUG lbsr PRINTS fcc /Reading data from netpath/ fcb C$CR fcb $00 ENDC lda netpath,u ldb #SS.Ready os9 I$GetStt bcs ssignetpath clra tfr d,y lda netpath,u ldx nnext,u os9 I$Read lbcs errex tfr y,d leax d,x stx nnext,u lda -1,x cmpa #C$CR lbne ssignetpath leax nbuffer,u stx nnext,u lda #1 ldy #256 os9 I$WritLn * determine response lda ,x cmpa #'9 ble incoming cmpa #'F lbra ssignetpath * get token number incoming lbsr DEC_BIN std token,u IFNE DEBUG pshs d lbsr PRINTS fcc /Got token / fcb $00 puls d lbsr PRINT_DEC lbsr PRINTS fcb C$CR fcb $00 ENDC * skip over token number IFNE DEBUG lbsr PRINTS fcc /To Space.../ fcb C$CR fcb $00 ENDC lbsr TO_SP IFNE DEBUG lbsr PRINTS fcc /To Non-Space.../ fcb C$CR fcb $00 ENDC lbsr TO_NON_SP * get port number lbsr DEC_BIN std targetport,u IFNE DEBUG pshs d lbsr PRINTS fcc /Got request for port / fcb $00 ldd ,s lbsr PRINT_DEC lbsr PRINTS fcb C$CR fcb $00 puls d ENDC leax ForkProcForPort,pcr lbsr ProcInetd lbra ssignetpath we may want to tell server we have no app errex os9 F$Exit * Process inetd.conf file * * Entry: X = processor routine * * - open conf file * - read each line and get first parameter (port number) * - send it to the processor routine at x * - if error or end of file, close and return ProcInetd pshs x leax inetdconf,pcr lda #READ. os9 I$Open bcs adex IFNE DEBUG pshs d lbsr PRINTS fcc /Opened inetd.conf ok/ fcb C$CR fcb $00 puls d ENDC nextline leax lbuffer,u ldy #lbufferl-1 lbsr FGETS bcs closeup lbsr TO_NON_SP skip any leading spaces ldb ,x check for EOL or comment cmpb #C$CR beq nextline cmpb #'# beq nextline IFNE DEBUG pshs d,x lbsr PRINTS fcc /Reading line: / fcb $00 ldx 2,s lbsr PUTS puls d,x ENDC pshs a jsr [1,s] puls a bcc nextline closeup cmpb #E$EOF bne closeandex clrb closeandex pshs b,cc os9 I$Close puls b,cc adex puls x,pc * Setup ports * Extract first parameter at X and send to server SetupPorts lbsr DEC_BIN cmpd #0 beq ret0 * find comma and change it to nul tfr x,y setuploop lda ,y+ cmpa #C$CR beq ret0 cmpa #', bne setuploop setuplisten clr -1,y IFNE DEBUG pshs d,x lbsr PRINTS fcc /Send listen/ fcb C$CR fcb $00 puls d,x ENDC lda netpath,u lbsr TCPListen ret0 rts retcc clrb rts * Fork Proccess that matches target port * Extract first parameter at X and see if it matches target port * if so, read rest of line and fork the process * Line looks like this: portnumberplusoptions,prog,params,path opts ForkProcForPort * get port number lbsr DEC_BIN IFNE DEBUG pshs d lbsr PRINTS fcc /Reading port / fcb $00 ldd ,s lbsr PRINT_DEC lbsr PRINTS fcb C$CR fcb $00 lbsr PRINTS fcc /Comparing to port / fcb $00 ldd targetport,u lbsr PRINT_DEC lbsr PRINTS fcb C$CR fcb $00 puls d ENDC cmpd targetport,u lbne retcc * point Y to byte after comma portloop lda ,y+ cmpa #C$CR beq ret0 cmpa #', bne portloop tfr y,x * copy bytes up to comma at X leay targetprog,u prgloop lda ,x+ cmpa #', beq sethi cmpa #C$CR lbeq ret sta ,y+ bra prgloop sethi lda -1,y ora #$80 sta -1,y copypar clr tmodeparamlen,u leay targetparams,u parloop lda ,x+ sta ,y+ cmpa #', beq procopts cmpa #C$CR beq gotprocparms procopts leay tmodeparams,u procoptsloop lda ,x+ sta ,y+ inc targetparams,u cmpa #C$CR beq procoptsloop gotprocparms IFNE DEBUG pshs d lbsr PRINTS fcc /Got proc and params to fork/ fcb C$CR fcb $00 puls d ENDC * ignore client port number and hostname for now lbsr TCPOpen bcc savechild ldd token,u leas -8,s leax ,s lbsr BIN_DEC lda netpath,u tfr x,y lbsr TCPKill leas 8,s lbra forkex savechild sta childnetpath,u ldd token,u leas -8,s leax ,s lbsr BIN_DEC lda childnetpath,u tfr x,y lbsr TCPJoin leas 8,s bcc turnonechoalf os9 I$Close lbra forkex turnonechoalf IFNE DEBUG pshs d lbsr PRINTS fcc /Turning on PD.EKO and PD.ALF/ fcb C$CR fcb $00 puls d ENDC lbsr SetEchoOn lbcs ret lbsr SetAutoLFOn lbcs ret * dup paths duper IFNE DEBUG pshs d lbsr PRINTS fcc /Duping paths/ fcb C$CR fcb $00 puls d ENDC clra os9 I$Dup lbcs errex sta orgstdin,u lda #1 os9 I$Dup lbcs errex sta orgstdout,u lda #2 os9 I$Dup lbcs errex sta orgstderr,u * close original stdin/out/err paths clra os9 I$Close inca os9 I$Close inca os9 I$Close * Dup child net path to stdin/stdout/stderr lda childnetpath,u os9 I$Dup lbcs errex os9 I$Dup lbcs errex os9 I$Dup lbcs errex * fork tmode process if tmode param length > 0 tst tmodeparamlen,u beq forkchild pshs u leax tmode,pcr leau tmodeparams,u lda #Objct clrb ldy #256 os9 F$Fork puls u os9 F$Wait * fork child process forkchild pshs u leax targetprog,u leau targetparams,u lda #Objct clrb ldy #256 os9 F$Fork puls u * If our F$Fork fails, do not error out... * bcs ret2 * restore orginal paths clra os9 I$Close inca os9 I$Close inca os9 I$Close lda orgstdin,u os9 I$Dup lbcs errex lda orgstdout,u os9 I$Dup lbcs errex lda orgstderr,u os9 I$Dup lbcs errex lda orgstdin,u os9 I$Close lda orgstdout,u os9 I$Close lda orgstderr,u os9 I$Close lda childnetpath,u os9 I$Close IFNE DEBUG pshs d lbsr PRINTS fcc /Proc forked/ fcb C$CR fcb $00 puls d ENDC forkex comb ldb #E$EOF ret rts inetdconf fcc "....../SYS/inetd.conf" fcb C$CR endsect