Mercurial > hg > Members > kono > nitros9-code

view level1/modules/scdwvdesc.asm @ 2897:260116065a2f lwtools-port

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
arcadepak: Add empty_smash.txt and empty_thexder.txt dummy files This was done in default branch in commit 9b29d654db13 but did not get into the lwtools branch. We'll probably do this differently later, but for now I'll just pick this solution. At this point everything I have spotted of useful changes in the default branch has been pushed to the lwtools branch. I have cherry-picked changes both ways in order to make a merge easier, but a real merge will probably not be useful. I did try it out and waded through merge conflicts and diff'ed the result with current lwtools branch, so I am pretty sure nothing useful will be lost.
author Tormod Volden <debian.tormod@gmail.com>
date Sat, 11 Jan 2014 18:20:09 +0100
parents be0c9c15f08a
children
line wrap: on
line source

********************************************************************
* scdwvdesc - Drivewire Virtual Device Descriptor
*
* $Id$
*
* Edt/Rev  YYYY/MM/DD  Modified by
* Comment
* ------------------------------------------------------------------
*   0.3    2009/12/??  Aaron Wolfe
* Added SHARE. bit to mode.
*
*   0.4    2009/12/27  Boisy G. Pitre
* Removed SHARE. bit from mode because of tsmon issues.
*
*   0.5    2009/12/29  Boisy G. Pitre
* Made U and T descriptor templates. Backspace is now $7F for
* telnet clients which are likely to access the T ports.
*
* This descriptor has slightly different defaults, intended to be used as
* the channel for the DriveWire utilities
*
*   0.6    2010/01/12  Boisy G. Pitre
* Renamed.
*
*   0.7    2010/01/20  Boisy G. Pitre
* No more /N0.  /Term is /N0.
*
*   0.8    2010/05/28  Aaron Wolfe
* /N14 is now /MIDI

         nam   scdwdesc
         ttl   DriveWire Virtual Device Descriptor

         ifp1
         use   defsfile
         endc

tylg     set   Devic+Objct
atrv     set   ReEnt+rev
rev      set   $07

         mod   eom,name,tylg,atrv,mgrnam,drvnam

         fcb   SHARE.+UPDAT.   	mode byte
         fcb   HW.Page    extended controller address
         fdb   $FF00+Addr      physical controller address
         fcb   initsize-*-1 initilization table size
         fcb   DT.SCF     device type:0=scf,1=rbf,2=pipe,3=scf
         fcb   $00        case:0=up&lower,1=upper only
         fcb   $01        backspace:0=bsp,1=bsp then sp & bsp
         fcb   $00        delete:0=bsp over line,1=return
         IFEQ  Addr-0
         fcb   $01        echo:0=no echo
         fcb   $01        auto line feed:0=off
         ELSE
         IFGT  Addr-14
         fcb   $01        echo:0=no echo
         fcb   $01        auto line feed:0=off
         ELSE
         fcb   $00        echo:0=no echo
         fcb   $00        auto line feed:0=off
         ENDC
         ENDC
         fcb   $00        end of line null count
         fcb   $00        pause:0=no end of page pause
         fcb   24         lines per page (not a safe assumption anymore!)
         IFEQ  Addr-14
         fcb   0      backspace character (on most telnet clients)
         fcb   0      delete line character
         fcb   0       end of record character
         fcb   0      end of file character
         fcb   0     reprint line character
         fcb   0     duplicate last line character
         fcb   0     pause character
         fcb   0     interrupt character
         fcb   0     quit character
         fcb   0      backspace echo character
         fcb   0     line overflow character (bell)
         ELSE
         fcb   C$BSP      backspace character (on most telnet clients)
         fcb   C$DEL      delete line character
         fcb   C$CR       end of record character
         fcb   C$EOF      end of file character
         fcb   C$RPRT     reprint line character
         fcb   C$RPET     duplicate last line character
         fcb   C$PAUS     pause character
         fcb   C$INTR     interrupt character
         fcb   C$QUIT     quit character
         fcb   C$BSP      backspace echo character
         fcb   C$BELL     line overflow character (bell)
         ENDC
         fcb   $00        mode byte for terminal descriptor
         fcb   B600       baud rate (not used, maybe future assignment?)
         fdb   name       copy of descriptor name address
         fcb   $00        acia xon char (not used, maybe future assignment?)
         fcb   $00        acia xoff char (not used, maybe future assignment?)
         fcb   80         (szx) number of columns for display
         fcb   24         (szy) number of rows for display
initsize equ   *

name     equ   *
         IFEQ  Addr-0
         fcs   /Term/
         ELSE
         IFEQ  Addr-14
         fcs  /MIDI/
         ELSE
         IFEQ  Addr-255
         fcs   'N'
         ELSE
         IFGT  Addr-15
         IFEQ  Addr-16
         fcs   /Term/
         ELSE
         fcc   /Z/
         fcb   176+Addr-16
         ENDC
         ELSE
         fcc   /N/
         IFGT  Addr-9
         fcc   '1'
         fcb   176+Addr-10
         ELSE
         fcb   176+Addr
         ENDC
         ENDC
         ENDC
         ENDC
         ENDC
mgrnam   fcs   /SCF/
drvnam   fcs   /scdwv/

         emod
eom      equ   *
         end