********************************************************************
* Rammer - NitrOS-9 Level 2 RAM Disk
*
* $Id$
*
* Alan DeKok's version of RAMMER - Based on original Keving Darling version
*
* NOTE: For some reason, when DEINIZing /r0, the INIT routine gets called...
*       but it still deallocates memory!
*
* Edt/Rev  YYYY/MM/DD  Modified by
* Comment
* ------------------------------------------------------------------
*   4      ????/??/??  ???
* Original Kevin Darling Version.
*
*   5      2000/03/14  L. Curtis Boyle
* Several changes
*
*   5r2    2000/05/09  L. Curtis Boyle
* Allowed driver to go past 400K, attempted some fixes for handling /MD,
* so that setting vfy=0 on /R0 would not completely crash the system.
* Fixed some error reporting bugs that would crash the system, and
* moved entry table to between READ/WRITE to allow short branches to both.


* Following CAN be set higher, but will take another page of system RAM then.
* 200 will allow maximum of 1,638,400 byte RAM drive.
MAXBLOCK set   201         Maximum # of MMU blocks allowed in RAM drive

         nam   Rammer
         ttl   NitrOS-9 Level 2 RAM Disk

         ifp1
         use   defsfile
         use   rbfdefs
         endc

tylg     set   Drivr+Objct   
atrv     set   ReEnt+rev
rev      set   $02
edition  set   5

         mod   eom,name,tylg,atrv,start,size

* Device mem stuff - can make MMUTable bigger, but will take 2 pages of system
*  RAM then for device memory
u0000    rmb   DRVBEG+DRVMEM     Reserve room for 1 entry drive table
MDFlag   rmb   1         0=R0 descriptor, <>0=MD descriptor
numofBlk rmb   1         # of MMU blocks allocated for RAM drive
MMUTable rmb   MAXBLOCK  Table of MMU Block #'s being used.
size     equ   .

         fcb   DIR.+SHARE.+PREAD.+PWRIT.+PEXEC.+READ.+WRITE.+EXEC.

name     fcs   /Rammer/
         fcb   edition

* Terminate routine - deallocates RAM
L0024    lda   <numofBlk,u   Get # blocks we had allocated
         beq   L003D         If none, exit
         leay  <MMUTable,u   Point to MMU block table
         IFNE  H6309
         clre                Hi byte of block # to allocate (always 0)
L002E    ldf   ,y            Get block #
         ELSE
L002E    ldb   ,y
         ENDC
         clr   ,y+           Zero it out in table
         IFNE  H6309
         tfr   w,x           Block # to deallocate
         ELSE
         pshs  a
         clra
         tfr   d,x
         puls  a
         ENDC
         ldb   #$01          1 block to deallocate
         os9   F$DelRAM      Deallocate the block
         deca                Dec # of blocks to clean out
         bne   L002E         Do until entire RAM drive is deallocated
L003D    clrb                Exit w/o error
         rts

* Deallocate RAM allocated so far, exit with no RAM error
L003F    bsr   L0024        Deallocate all RAM Drive ram blocks
L0041    comb               Exit no RAM left error
         ldb   #E$MemFul
         rts

* Init routine - only gets called once per driver inited.
* Called if you INIZ the device as well
* Entry: Y=Address of device descriptor
*        U=Device mem area
* NOTE: All of device mem (Except V.PORT) is cleared to 0's
Init     lda   #1
         sta   V.NDRV,u     only can handle 1 drive descriptor
         leax  DRVBEG,u     Point to start of drive table
         sta   DD.TOT+2,x   Set DD.TOT to non 0 value
         lda   <M$Opt,y     Get # of bytes in device descriptor table
         deca
* Following is if 1st access to RAMMER is on /MD
         beq   GetStat      0 (/MD desciptor), then exit w/o error
         ldb   <IT.CYL+1,y  Get LSB of # of cylinders
         lda   <IT.SID,y    Get # of heads
         mul                Calculate # head/cyls total
         lda   <IT.SCT+1,y  Get # of sectors/track
         mul                Calculate # of sectors for RAM drive
         subd  <IT.SCT,y    Subtract 1 tracks worth
         addd  <IT.T0S,y    Add in the special track 0's # sectors/track
         std   DD.TOT+1,x   Save as # sectors on drive
         addd  #$001F       Round up to nearest 8K block
         IFNE  H6309
         rold               Shift # of 8K blocks needed into A
         rold
         rold
         ELSE
         rolb
         rola 
         rolb
         rola 
         rolb
         rola 
         ENDC
         cmpa  #MAXBLOCK    If higher than max, exit with mem full error
         bhi   L0041
         leax  <MMUTable,u  Point to RAM block table
         IFNE  H6309
         tfr   a,e          # blocks left to allocate
         ENDC
L0078    ldb   #$01         Try to allocate 1 8K RAM block
         IFEQ  H6309
         pshs  a
         ENDC
         os9   F$AllRAM
         IFEQ  H6309
         puls  a
         ENDC
         bcs   L003F        If error, deallocate RAM, and exit
         inc   <numofBlk,u  Bump up # of blocks allocated
         stb   ,x+          Save MMU block # allocated in table
         IFNE  H6309
         dece               Do until done all blocks requested
         ELSE
         deca
         ENDC
         bne   L0078
         clrb               No error & return
         rts

* Entry: B:X=LSN to read (only X will be used, even with 2 MB)
*        Y=Path dsc. ptr
*        U=Device mem ptr
Read     pshs  y,x          Preserve path & device mem ptrs
         bsr   L00C8        Calculate MMU block & offset for sector
         bcs   L00A5        Error, exit with it
         bsr   L00AE        Transfer sector from RAM drive to PD.BUF
         puls  y,x          Restore ptrs
         leax  ,x           Sector 0?
         bne   GetStat      No, exit without error
         ldx   PD.BUF,y     Get buffer ptr
         leay  DRVBEG,u     Point to start of drive table
         IFNE  H6309
         ldw   #DD.SIZ      Copy the info we need into drive table
         tfm   x+,y+
         ELSE
         ldb   #DD.SIZ      Copy the info we need into drive table
ReadLp   lda   ,x+
         sta   ,y+
         decb
         bne   ReadLp
         ENDC
* GetStat/SetStat - no calls, just exit w/o error
GetStat  clrb
L00A7    rts

L00A5    puls  y,x,pc

start    bra   Init
         nop
         bra   Read
         nop
         bra   Write
         nop
         bra   GetStat
         nop
         bra   GetStat       Actually SetStat (no calls, so same routine)
         nop
         lbra  L0024         Terminate (returns memory)

* Entry: B:X = LSN to write
*        Y=Path dsc. ptr
*        U=Device mem ptr
Write    bsr   L00C8          Calculate MMU Block & offset for sector
         bcs   L00A7          Error,exit with it
         exg   x,y            X=Sector buffer ptr, Y=Offset within MMU block
* Transfer between RBF sector buffer & RAM drive image sector buffer
* Called by both READ and WRITE (with X,Y swapping between the two)
L00AE    orcc  #IntMasks      Shut IRQ's off
         pshs  x              Preserve X
         ldx   <D.SysDAT      Get ptr to system DAT image
         ldb   1,x            Get original System MMU block #0
         puls  x              Get X back
         sta   >$FFA0         Map in RAM drive block into block #0
         IFNE  H6309
         ldw   #$0100         256 byte transfer
         tfm   x+,y+          Copy between the two buffers
         ELSE
         clrb
WriteLp  lda   ,x+
         sta   ,y+
         decb
         bne   WriteLp
         ENDC
         stb   >$FFA0         Remap in system block 0
         andcc #^(IntMasks+Carry) Turn IRQ's back on & no error
         rts

* Subroutine to calculate MMU block # and offset based on sector # requested
* Entry: Y=path dsc. ptr
*        U=device mem ptr
*        B:X=LSN to calculate for
* Exit: A=MMU block # we need to map in
*       X=offset within MMU block to get sector from (always <8K)
*       Y=Sector buffer ptr for RBF
*       MDFlag,u=0 if NOT MD, else MD
L00C8    clr   MDFlag,u       Flag that we are on "real" RAM Drive
         IFNE  H6309
         ldw   PD.DEV,y       Get our Device table entry ptr
         ldw   V$DESC,w       Get device descriptor ptr
         lda   M$Opt,w        Get size of options table
         ELSE
         pshs  x
         ldx   PD.DEV,y       Get our Device table entry ptr
         ldx   V$DESC,x       Get device descriptor ptr
         lda   M$Opt,x        Get size of options table
         puls  x
         ENDC
         deca
         bne   L00DB          Not MD, skip ahead
         inc   MDFlag,u       Flag we are on MD
         sta   <PD.SIZ,y
         sta   <PD.SIZ+3,y
         sta   <PD.SSZ,y
         ldd   <D.BlkMap+2    Get end of block memory ptr
         subd  <D.BlkMap      Calc # of blocks of RAM
         lda   #32            * 32 for # of 'sectors'
         mul
         std   <PD.SIZ+1,y    Save as middle word of file size
         std   <PD.SSZ+1,y    Save as segment size
         bra   L00DE          Skip ahead (sector # will allow all 2 MB)

L00DB    tstb                 Test MSB of sector #
         bne   L010F          <>0, exit with Sector error
L00DE    pshs  x              Preserve LSW of sector #
         ldd   ,s             Load it again into D
         tst   MDFlag,u       We on MD?
         bne   L00EE          Yes, skip ahead
         leax  DRVBEG,u       Point to drive table
         cmpd  DD.TOT+1,x     LSW of sector compared to table's # of sectors
         bhs   L010E          Sector # too large, exit with error
L00EE    equ   *
         IFNE  H6309
         rold                 A=MMU block offset in RAM drive image
         rold
         rold
         ELSE
         rolb
         rola
         rolb
         rola
         rolb
         rola
         ENDC
         tst   MDFlag,u       We on /MD?
         bne   L0100          Yup, skip calculating MMU stuff
         leax  <MMUTable,u    Point to MMU table
         lda   a,x            Get MMU block # we want
         beq   L010E          If 0, exit with sector error
L0100    pshs  a              Save block #
         clrb                 Calculate offset within 8k block we want
         lda   2,s
         anda  #$1F           Mask out all but within 8K address offset
         std   1,s            Save offset
         ldy   PD.BUF,y       Get sector buffer address
         puls  x,a,pc         Get offset, MMU block & return

L010E    leas  2,s          Eat X on stack
L010F    comb               Exit with bad sector #
         ldb   #E$Sect
         rts

         emod
eom      equ   *
         end