********************************************************************
* ROMInfo - NitrOS-9 ROM Relocation Code
*
* $Id: rominfo.asm,v 1.1 2004/04/05 03:34:39 boisy Exp $
*
* Edt/Rev  YYYY/MM/DD  Modified by
* Comment
* ------------------------------------------------------------------
*   1      1998/05/03  Boisy G. Pitre
* Created for the Coyota project and later productized.

         nam   ROMInfo
         ttl   NitrOS-9 ROM Relocation Code

         ifp1  
         use   defsfile
         endc  

tylg     set   Systm+Objct
atrv     set   ReEnt+rev
rev      set   $01
edition  set   1

* Untested!
         IFNE  ROMPak
         jmp   $C000+start
         ENDC

         mod   eom,name,tylg,atrv,start,size

size     equ   .

name     fcs   /ROMInfo/
         fcb   edition

start    equ   *

         IFGT  Level-1

* NitrOS-9 Level 2 - CoCo 3
* Bring the CoCo 3 to sanity
         orcc  #IntMasks  disable FIRQ, IRQ
         clr   $FFD9      go into fast mode
         lda   #$0A       CC3 Mode, No MMU, 32K Int. ROM
         sta   $FF90
         clr   $FFDE      RAM/ROM mode (upper 16K ROM at $C000)

* Setup MMU
         ldx   #DAT.Regs
         leay  MMUTbl,pcr
         IFNE  H6309
         ldw   #16
         tfm   y+,x+
         ELSE
         ldb   #16
MMULoop  lda   ,y+
         sta   ,x+
         decb  
         bne   MMULoop
         ENDC

* Set up CoCo 3 Video Registers at $FF98-$FF9F
         ldd   #$0000
         std   $FF98
         std   $FF9A
         std   $FF9E
         ldd   #$0FE0
         std   $FF9C

* Initialize PIAs
         ldx   #PIA1Base  RG - Initialize the PIA 1
         ldd   #$FF34
         clr   1,x
         clr   3,x
         deca  
         sta   ,x
         lda   #$F8
         sta   2,x
         stb   1,x
         stb   3,x
         clr   2,x
         lda   #$02
         sta   ,x

         lda   #$FF       RG - Initialize the PIA 0
         ldx   #PIA0Base
         clr   1,x
         clr   3,x
         clr   ,x
         sta   2,x
         stb   1,x
         stb   3,x

         tfr   b,dp
         clr   2,x


         lda   #$CA       RG - CC2 mode, MMU, constant DRAM, 32K internal ROM
         sta   $FF90

         bra   RelROM

* MMU
MMUTbl         
         fcb   $38,$39,$3A,$3B,$3C,$3D,$3E,$3F
         fcb   $38,$39,$3A,$3B,$3C,$3D,$3E,$3F

* ROM relocation code -- copies the boot track into $2600 and JMPs to it
RelROM   ldx   #$EC00 src address (boot track in ROM)
         ldy   #$2600     dst address (RAM)
         IFNE  H6309
         ldw   #$1200
         tfm   x+,y+
         ELSE
copyloop ldd   ,x++       get 2 bytes from src
         std   ,y++       put 2 bytes to dst
         cmpx  #$EC00+$1200 at end?
         blo   copyloop   nope, copy more...
         ENDC
         jmp   $2602      jump to OS rel code

         ELSE

* NitrOS-9 Level 1 - CoCo 1/2
         ldx   #PIA1Base                 PIA1
         clr   -3,x                    clear PIA0 Control Register A
         clr   -1,x                    clear PIA0 Control Register B
         clr   -4,x                    set PIA0 side A to input
         ldd   #$FF34
         sta   -2,x                    set PIA0 side B to output
         stb   -3,x                    enable PIA0 peripheral reg, disable PIA0
         stb   -1,x                    MPU interrupts, set CA2, CA1 to outputs
         clr   1,x                     $FF20 = DDR, motoroff
         clr   3,x                     $FF22 = DDR, sound disabled
         deca                          A = $FE after deca
         sta   ,x                      bits 1-7 are outputs, bit 0 is input on PIA1 side A
         lda   #$F8
         sta   2,x                     bits 0-2 are inputs, bits 3-7 are outputs on B side
         stb   1,x                     enable peripheral registers, disable PIA1 MPU
         stb   3,x                     interrupts and set CA2, CB2 as outputs
         clr   2,x                     set 6847 mode to alphanumeric
         ldb   #$02
         stb   ,x                      make RS-232 output marking
         clrb
         tfr   b,dp                    B = 0
         ldb   #$04
         clr   -2,x
         bitb  2,x

         lda   #$37
         sta   PIA1Base+3

         lda   PIA0Base+3
         ora   #$01
         sta   PIA0Base+3

         lda   PIA1Base+2
         anda  #$07
         sta   PIA1Base+2

* VDG Mode
         sta   $FFC0
         sta   $FFC2
         sta   $FFC4

* 64K DRAM (M0=0, M1=1)
         sta   $FFDA                   RESET M0
         sta   $FFDD                   SET   M1

* ROM relocation code -- copies the boot track into $2600
RelROM   ldx   #$AE00                  src address (ROM)
         ldy   #$2600                  dst address (RAM)
         IFNE  H6309
         ldw   #$1200
         tfm   x+,y+
         ELSE
copyloop ldd   ,x++                    get 2 bytes from src
         std   ,y++                    put 2 bytes to dst
         cmpx  #$AE00+$1200            at end?
         blo   copyloop                nope, copy more...
         ENDC
* BOOT relocation code -- copies the bootfile into $2600+$1200
RelBOOT  ldx   #$8000
         ldy   #$2600+$1200
         IFNE  H6309
         ldw   #$2E00
         tfm   x+,y+
         ELSE
cpy2loop ldd   ,x++
         std   ,y++
         cmpx  #$8000+$2E00
         blo   cpy2loop
         ENDC
         jmp   $2602                   jump to OS rel code

         ENDC

         emod  
eom      equ   *
         end