Mercurial > hg > Members > kono > nitros9-code

view scripts/bootlistl1 @ 2739:7afa11757a81

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Adding the burst script to the repo so users who have write access to the project are able to put the script on their sourceforge ssh server account. This will allow the user to use the "make nightly" function. As long as said user has write permision to the project.
author drencor-xeen
date Fri, 04 Jan 2013 11:50:24 -0600
parents 1e312b144f4d
children
line wrap: on
line source

***************************************
* Kernel/System Section
*
* These modules are mandatory.
$NITROS9DIR/$DISTRO/modules/ioman
*
***************************************
* RBF Section
*
$NITROS9DIR/$DISTRO/modules/rbf.mn
*
* DriveWire driver (Cloud-9 product)
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/drivewire.dr
* DriveWire descriptors - select as needed
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/ddx0.dd
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/x0.dd
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/x1.dd
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/x2.dd
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/x3.dd
*
* SuperDriver Package (Cloud-9 product)
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/rbsuper.dr
* Select Low level SCSI and/or IDE driver
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/lltc3.dr
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/llide.dr
* SuperDriver descriptors - select as needed
* SCSI descriptors (IDs 0-7)
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s0_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s1_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s2_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s3_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s4_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s5_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s6_tc3.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/s7_tc3.dd
* SCSI HDB-DOS descriptor
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/sh_ide.dd
* IDE descriptors (master/slave)
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/i0_ide.dd
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/i1_ide.dd
* IDE HDB-DOS descriptor
*$CLOUD9DIR/Products/SuperDrivers/software/$DISTRO/ih_ide.dd
*
* WD1773 floppy support for Tandy and compatible disk controllers
$NITROS9DIR/$DISTRO/modules/rb1773.dr
* WD1773 floppy support for Disto Super Controller II
*$NITROS9DIR/$DISTRO/modules/rb1773_scii_ff74.dr
*$NITROS9DIR/$DISTRO/modules/rb1773_scii_ff58.dr
* Floppy device descriptors
* DD - default device - choose one if needed
*$NITROS9DIR/$DISTRO/modules/ddd0_35s.dd
*$NITROS9DIR/$DISTRO/modules/ddd0_40d.dd
*$NITROS9DIR/$DISTRO/modules/ddd0_80d.dd
* D0 - drive 0 - choose one if needed
*$NITROS9DIR/$DISTRO/modules/d0_35s.dd
$NITROS9DIR/$DISTRO/modules/d0_40d.dd
*$NITROS9DIR/$DISTRO/modules/d0_80d.dd
* D1 - drive 1 - choose one if needed
*$NITROS9DIR/$DISTRO/modules/d1_35s.dd
$NITROS9DIR/$DISTRO/modules/d1_40d.dd
*$NITROS9DIR/$DISTRO/modules/d1_80d.dd
* D2 - drive 2 - choose one if needed
*$NITROS9DIR/$DISTRO/modules/d2_35s.dd
$NITROS9DIR/$DISTRO/modules/d2_40d.dd
*$NITROS9DIR/$DISTRO/modules/d2_80d.dd
* D3 - drive 3 - choose if needed
*$NITROS9DIR/$DISTRO/modules/d3_35s.dd
***************************************
* SCF Section
*
$NITROS9DIR/$DISTRO/modules/scf.mn
*
* CoCo I/O driver and subroutine modules
$NITROS9DIR/$DISTRO/modules/ccio.dr
* Choose from CO32 (32x16 VDG) or CO51 (51x24 graphics screen)
*$NITROS9DIR/$DISTRO/modules/co32.io
*$NITROS9DIR/$DISTRO/modules/co51.io
$NITROS9DIR/$DISTRO/modules/wordpakii.dr
*
* Select only one term descriptor
*$NITROS9DIR/$DISTRO/modules/term32.dt
*$NITROS9DIR/$DISTRO/modules/term51.dt
$NITROS9DIR/$DISTRO/modules/term80.dt
*$NITROS9DIR/$DISTRO/modules/term_sio.dt
*$NITROS9DIR/$DISTRO/modules/term_sc6551.dt
*
* Serial port drivers
* Built-In RS-232 port
*$NITROS9DIR/$DISTRO/modules/sio.dr
*$NITROS9DIR/$DISTRO/modules/t1.dd
* 6551 ACIA
*$NITROS9DIR/$DISTRO/modules/sc6551.dr
*$NITROS9DIR/$DISTRO/modules/t2_sc6551.dd
*$NITROS9DIR/$DISTRO/modules/t3_sc6551.dd
*
* Printer drivers
*$NITROS9DIR/$DISTRO/modules/printer.dr
*$NITROS9DIR/$DISTRO/modules/p.dd
*
***************************************
* Pipe Section
*
* Pipes are a useful but optional part of a system.
$NITROS9DIR/$DISTRO/modules/pipeman.mn
$NITROS9DIR/$DISTRO/modules/piper.dr
$NITROS9DIR/$DISTRO/modules/pipe.dd
*
***************************************
* Clock Section
*
* Select one clock module depending upon your power line frequency
* (60Hz = USA/Canada; 50Hz = Europe, Australia)
$NITROS9DIR/$DISTRO/modules/clock_60hz
*$NITROS9DIR/$DISTRO/modules/clock_50hz
* Select one clock2 module that supports your real-time clock, if any.
* Besides support for the internal software clock, the following
* hardware clocks are supported: Burke & Burke, Disto 2-N-1, Disto 4-N-1,
* Eliminator, Harris, SmartWatch, Cloud-9, the MESS emulator, Jeff
* Vavasour's CoCo emulator, and DriveWire.
*$NITROS9DIR/$DISTRO/modules/clock2_soft
*$NITROS9DIR/$DISTRO/modules/clock2_bnb
*$NITROS9DIR/$DISTRO/modules/clock2_disto2
*$NITROS9DIR/$DISTRO/modules/clock2_disto4
*$NITROS9DIR/$DISTRO/modules/clock2_elim
*$NITROS9DIR/$DISTRO/modules/clock2_harris
*$NITROS9DIR/$DISTRO/modules/clock2_smart
*$NITROS9DIR/$DISTRO/modules/clock2_jvemu
*$NITROS9DIR/$DISTRO/modules/clock2_messemu
*$NITROS9DIR/$DISTRO/modules/clock2_cloud9
$CLOUD9DIR/Products/DriveWire/software/$DISTRO/clock2_dw
* 
***************************************
* System Kick-Start Module
*
* Choose which startup module you wish to use. (sysgo_dd is recommended
* for most configurations.)
$NITROS9DIR/$DISTRO/modules/sysgo_dd
*$NITROS9DIR/$DISTRO/modules/sysgo_h0