view level1/modules/t1_scbbt.asm @ 3047:a951ab0b3003

level1 6309: Switch to native mode early in rel.asm Otherwise it will crash in the first F$Link call.
author Robert Gault <robert.gault@att.net>
date Sat, 24 Jan 2015 23:15:55 +0100
parents a80f533398ff
children
line wrap: on
line source

********************************************************************
* T1 - CoCo Bit-Banger Terminal Device Descriptor
*
* $Id$
*
* Edt/Rev  YYYY/MM/DD  Modified by
* Comment
* ------------------------------------------------------------------

         nam   T1
         ttl   CoCo Bit-Banger Terminal Device Descriptor

* Disassembled 98/08/23 21:16:45 by Disasm v1.6 (C) 1988 by RML

         ifp1  
         use   defsfile
         endc  

tylg     set   Devic+Objct
atrv     set   ReEnt+rev
rev      set   $00

         mod   eom,name,tylg,atrv,mgrnam,drvnam

         fcb   UPDAT.
         fcb   HW.Page    extended controller address
         fdb   $FF20      physical controller address
         fcb   initsize-*-1 initilization table size
         fcb   DT.SCF     device type:0=scf,1=rbf,2=pipe,3=scf
         fcb   $00        case:0=up&lower,1=upper only
         fcb   $01        backspace:0=bsp,1=bsp then sp & bsp
         fcb   $00        delete:0=bsp over line,1=return
         fcb   $01        echo:0=no echo
         fcb   $01        auto line feed:0=off
         fcb   $00        end of line null count
         fcb   $01        pause:0=no end of page pause
         fcb   24         lines per page
         fcb   C$BSP      backspace character
         fcb   C$DEL      delete line character
         fcb   C$CR       end of record character
         fcb   C$EOF      end of file character
         fcb   C$RPRT     reprint line character
         fcb   C$RPET     duplicate last line character
         fcb   C$PAUS     pause character
         fcb   C$INTR     interrupt character
         fcb   C$QUIT     quit character
         fcb   C$BSP      backspace echo character
         fcb   C$BELL     line overflow character (bell)
         fcb   WORD8+PARNONE+STOP1 init value for dev ctl reg
         IFGT  Level-1
         fcb   B2400      baud rate
         ELSE
         fcb   B300       baud rate
         ENDC
         fdb   name       copy of descriptor name address
         fcb   $00        acia xon char
         fcb   $00        acia xoff char
         fcb   80         (szx) number of columns for display
         fcb   24         (szy) number of rows for display
initsize equ   *

name     fcs   /T1/
mgrnam   fcs   /SCF/
drvnam   fcs   /scbbt/

         emod  
eom      equ   *
         end