Mercurial > hg > Members > kono > nitros9-code
view level1/modules/scdwndesc.asm @ 2763:c03464c24b14
Fixed a minor typo in the arcadepak's makefile related to DriveWire3 and Becker.
Updated makefile with new option nightlytest. Run option is "make nightlytest".
You also need to test environment variable TESTSSHDIR and TESTSSHSERVER before using it.
Also updated the nightly option so if the SOURCEUSER environment variable is not set it will report it.
| author | drencor-xeen |
|---|---|
| date | Wed, 16 Jan 2013 17:33:46 -0600 |
| parents | f3b7ca8083fd |
| children |
line wrap: on
line source
******************************************************************** * scdwdesc - Drivewire Network Device Descriptor * * $Id$ * * Edt/Rev YYYY/MM/DD Modified by * Comment * ------------------------------------------------------------------ * 0.3 2009/12/?? Aaron Wolfe * Added SHARE. bit to mode. * * 0.4 2009/12/27 Boisy G. Pitre * Removed SHARE. bit from mode because of tsmon issues. * * 0.5 2009/12/29 Boisy G. Pitre * Made U and T descriptor templates. Backspace is now $7F for * telnet clients which are likely to access the T ports. * * This descriptor has slightly different defaults, intended to be used as * the channel for the DriveWire utilities * * 0.6 2010/01/12 Boisy G. Pitre * Renamed. * * 0.7 2010/01/20 Boisy G. Pitre * No more /N0. /Term is /N0. * * 0.8 2010/05/28 Aaron Wolfe * /N14 is now /MIDI nam scdwdesc ttl DriveWire network Device Descriptor ifp1 use defsfile endc tylg set Devic+Objct atrv set ReEnt+rev rev set $07 mod eom,name,tylg,atrv,mgrnam,drvnam fcb SHARE.+UPDAT. mode byte fcb HW.Page extended controller address fdb $FF00+Addr physical controller address fcb initsize-*-1 initilization table size fcb DT.SCF device type:0=scf,1=rbf,2=pipe,3=scf fcb $00 case:0=up&lower,1=upper only fcb $01 backspace:0=bsp,1=bsp then sp & bsp fcb $00 delete:0=bsp over line,1=return IFEQ Addr-0 fcb $01 echo:0=no echo fcb $01 auto line feed:0=off ELSE IFGT Addr-14 fcb $01 echo:0=no echo fcb $01 auto line feed:0=off ELSE fcb $00 echo:0=no echo fcb $00 auto line feed:0=off ENDC ENDC fcb $00 end of line null count fcb $00 pause:0=no end of page pause fcb 24 lines per page (not a safe assumption anymore!) IFEQ Addr-14 fcb 0 backspace character (on most telnet clients) fcb 0 delete line character fcb 0 end of record character fcb 0 end of file character fcb 0 reprint line character fcb 0 duplicate last line character fcb 0 pause character fcb 0 interrupt character fcb 0 quit character fcb 0 backspace echo character fcb 0 line overflow character (bell) ELSE fcb C$BSP backspace character (on most telnet clients) fcb C$DEL delete line character fcb C$CR end of record character fcb C$EOF end of file character fcb C$RPRT reprint line character fcb C$RPET duplicate last line character fcb C$PAUS pause character fcb C$INTR interrupt character fcb C$QUIT quit character fcb C$BSP backspace echo character fcb C$BELL line overflow character (bell) ENDC fcb $00 mode byte for terminal descriptor fcb B600 baud rate (not used, maybe future assignment?) fdb name copy of descriptor name address fcb $00 acia xon char (not used, maybe future assignment?) fcb $00 acia xoff char (not used, maybe future assignment?) fcb 80 (szx) number of columns for display fcb 24 (szy) number of rows for display initsize equ * name equ * IFEQ Addr-0 fcs /Term/ ELSE IFEQ Addr-14 fcs /MIDI/ ELSE IFEQ Addr-255 fcs 'N' ELSE IFGT Addr-15 IFEQ Addr-16 fcs /Term/ ELSE fcc /Z/ fcb 176+Addr-16 ENDC ELSE fcc /N/ IFGT Addr-9 fcc '1' fcb 176+Addr-10 ELSE fcb 176+Addr ENDC ENDC ENDC ENDC ENDC mgrnam fcs /SCF/ drvnam fcs /scdwn/ emod eom equ * end