***************************************
* NitrOS-9 Level Two Bootlist
*
* $Id$
*
* This bootlist is presented as an example for creating custom bootfiles.
* A module may be excluded from the bootfile if an asterisk (*) is the
* first character of the line.
*
***************************************
* Kernel/System Section
*
* These modules are mandatory.
../MODULES/KERNEL/kernelp2
../MODULES/SYSMODS/ioman
../MODULES/SYSMODS/init
*
***************************************
* RBF Section
*
../MODULES/RBF/rbf.mn
*
* DriveWire driver (Cloud-9 product)
*../MODULES/RBF/drivewire.dr
* DriveWire descriptors - select as needed
*../MODULES/RBF/ddx0.dd
*../MODULES/RBF/x0.dd
*../MODULES/RBF/x1.dd
*../MODULES/RBF/x2.dd
*../MODULES/RBF/x3.dd  
*
* SuperSCSI drivers (Cloud-9 product)
* Select SCSI driver for TC^3, Ken-Ton or Disto Controller
*../MODULES/RBF/superscsi_tc3.dr
*../MODULES/RBF/superscsi_ktlr.dr
*../MODULES/RBF/superscsi_disto.dr
* SuperSCSI descriptors - select as needed
*../MODULES/RBF/dd_ez135_tc3.dd
*../MODULES/RBF/dd_ez135_ktlr.dd
*../MODULES/RBF/dd_ez135_d4n1.dd
*../MODULES/RBF/dd_ez135_hdii.dd
*../MODULES/RBF/h0_ez135_tc3.dd
*../MODULES/RBF/h0_ez135_ktlr.dd
*../MODULES/RBF/h0_ez135_d4n1.dd
*../MODULES/RBF/h0_ez135_hdii.dd
*../MODULES/RBF/c3_cdrom_tc3.dd
*../MODULES/RBF/c3_cdrom_ktlr.dd
*../MODULES/RBF/c3_cdrom_d4n1.dd
*../MODULES/RBF/c3_cdrom_hdii.dd
*../MODULES/RBF/h5_zip100_tc3.dd
*../MODULES/RBF/h5_zip100_ktlr.dd
*../MODULES/RBF/h5_zip100_d4n1.dd
*../MODULES/RBF/h5_zip100_hdii.dd
*../MODULES/RBF/hb_255_tc3.dd
*../MODULES/RBF/hb_255_ktlr.dd
*../MODULES/RBF/hb_255_d4n1.dd
*../MODULES/RBF/hb_255_hdii.dd
*
* CC3Disk - WD1773 floppy support
../MODULES/RBF/cc3disk.dr
* Floppy device descriptors
* DD - default device - choose one if needed
*../MODULES/RBF/ddd0_35s.dd
../MODULES/RBF/ddd0_40d.dd
*../MODULES/RBF/ddd0_80d.dd
* D0 - drive 0 - choose one if needed
*../MODULES/RBF/d0_35s.dd
../MODULES/RBF/d0_40d.dd
*../MODULES/RBF/d0_80d.dd
* D1 - drive 1 - choose one if needed
*../MODULES/RBF/d1_35s.dd
../MODULES/RBF/d1_40d.dd
*../MODULES/RBF/d1_80d.dd
* D2 - drive 2 - choose one if needed
*../MODULES/RBF/d2_35s.dd
*../MODULES/RBF/d2_40d.dd
*../MODULES/RBF/d2_80d.dd
* D3 - drive 3 - choose if needed
*../MODULES/RBF/d3_35s.dd
*
* RAMDisk driver
*../MODULES/RBF/rammer.dr
* RAMDisk descriptors - select as needed
*../MODULES/RBF/ddr0_8k.dd
*../MODULES/RBF/ddr0_96k.dd
*../MODULES/RBF/ddr0_128k.dd
*../MODULES/RBF/ddr0_192k.dd
*../MODULES/RBF/r0_8k.dd
*../MODULES/RBF/r0_96k.dd
*../MODULES/RBF/r0_128k.dd
*../MODULES/RBF/r0_192k.dd
* Memory device descriptor
*../MODULES/RBF/md.dd
***************************************
* SCF Section
*
../MODULES/SCF/scf.mn
*
* CoCo 3 I/O driver
* Joystick modules: choose Joystick OR
* (M)icrosoft or (L)ogitech mouse using 6551 or 6552 ACIA
../MODULES/SCF/cc3io.dr
../MODULES/SCF/keydrv_cc3.sb  
../MODULES/SCF/snddrv_cc3.sb
../MODULES/SCF/joydrv_joy.sb
*../MODULES/SCF/joydrv_6551M.sb
*../MODULES/SCF/joydrv_6552M.sb
*../MODULES/SCF/joydrv_6551L.sb
*../MODULES/SCF/joydrv_6552L.sb
*
* WindInt and VDGInt I/O subroutine modules
* Select one or both
../MODULES/SCF/windint.io
*../MODULES/SCF/vdgint.io
*../MODULES/SCF/vdgint_small.io
*
* Select only one term descriptor
*../MODULES/SCF/term_vdg.dt
*../MODULES/SCF/term_win40.dt
../MODULES/SCF/term_win80.dt
*
* Select as many window descriptors as needed
../MODULES/SCF/w.dw
../MODULES/SCF/w1.dw
../MODULES/SCF/w2.dw
../MODULES/SCF/w3.dw
../MODULES/SCF/w4.dw
../MODULES/SCF/w5.dw
../MODULES/SCF/w6.dw
../MODULES/SCF/w7.dw
*
* Select as many VDG window descriptors as needed
*../MODULES/SCF/v1.dw
*../MODULES/SCF/v2.dw
*../MODULES/SCF/v3.dw
*../MODULES/SCF/v4.dw
*../MODULES/SCF/v5.dw
*../MODULES/SCF/v6.dw
*../MODULES/SCF/v7.dw
*
* Serial port drivers
* Built-In RS-232 port
*../MODULES/SCF/sio.dr
*../MODULES/SCF/t1.dd
* 6551 ACIA
*../MODULES/SCF/sc6551.dr
*../MODULES/SCF/t2_sc6551.dd
*../MODULES/SCF/t3_sc6551.dd
* 6552 ACIA
*../MODULES/SCF/dacia.dr
*../MODULES/SCF/t2_dacia.dd
*../MODULES/SCF/t3_dacia.dd
* Tandy Modem Pak
*../MODULES/SCF/modpak.dr
*../MODULES/SCF/m1.dd
*../MODULES/SCF/m2.dd
*
* Printer drivers
* ../MODULES/SCF/printer.dr
* ../MODULES/SCF/p.dd
*
* VRN is a driver module used by certain games, including King's Quest III,
* Leisure Suit Larry and Flight Simulator II.  A /nil descriptor is also
* supported.
../MODULES/SCF/vrn.dr
../MODULES/SCF/vi.dd
../MODULES/SCF/ftdd.dd
*
***************************************
* Pipe Section
*
* Pipes are a useful but optional part of a system.
../MODULES/PIPE/pipeman.mn
../MODULES/PIPE/piper.dr
../MODULES/PIPE/pipe.dd
*
***************************************
* Clock Section
*
* Select one clock module depending upon your power line frequency
* (60Hz = USA/Canada; 50Hz = Europe, Australia)
../MODULES/CLOCKS/clock_60hz
*../MODULES/CLOCKS/clock_50hz
* Select one clock2 module that supports your real-time clock, if any.
* Besides support for the internal software clock, the following
* hardware clocks are supported: Burke & Burke, Disto 2-N-1, Disto 4-N-1,
* Eliminator, Harris, SmartWatch, TC^3, DriveWire
../MODULES/CLOCKS/clock2_soft
*../MODULES/CLOCKS/clock2_bnb
*../MODULES/CLOCKS/clock2_disto2
*../MODULES/CLOCKS/clock2_disto4
*../MODULES/CLOCKS/clock2_elim
*../MODULES/CLOCKS/clock2_harris
*../MODULES/CLOCKS/clock2_smart
*../MODULES/CLOCKS/clock2_tc3
*../MODULES/CLOCKS/clock2_dw
*
***************************************
* System Kick-Start Module
*
* Choose which startup module you wish to use. (sysgo_dd is recommended
* for most configurations.)
* 
* Alternatively, this module can reside in the root directory of the
* boot device, saving precious system RAM.
../MODULES/SYSMODS/sysgo_dd
*../MODULES/SYSMODS/sysgo_h0