--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/test/CodeGen/SystemZ/int-const-03.ll	Thu Dec 12 13:56:28 2013 +0900
@@ -0,0 +1,166 @@
+; Test moves of integers to byte memory locations.
+;
+; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
+
+; Check the low end of the unsigned range.
+define void @f1(i8 *%ptr) {
+; CHECK-LABEL: f1:
+; CHECK: mvi 0(%r2), 0
+; CHECK: br %r14
+  store i8 0, i8 *%ptr
+  ret void
+}
+
+; Check the high end of the signed range.
+define void @f2(i8 *%ptr) {
+; CHECK-LABEL: f2:
+; CHECK: mvi 0(%r2), 127
+; CHECK: br %r14
+  store i8 127, i8 *%ptr
+  ret void
+}
+
+; Check the next value up.
+define void @f3(i8 *%ptr) {
+; CHECK-LABEL: f3:
+; CHECK: mvi 0(%r2), 128
+; CHECK: br %r14
+  store i8 -128, i8 *%ptr
+  ret void
+}
+
+; Check the high end of the unsigned range.
+define void @f4(i8 *%ptr) {
+; CHECK-LABEL: f4:
+; CHECK: mvi 0(%r2), 255
+; CHECK: br %r14
+  store i8 255, i8 *%ptr
+  ret void
+}
+
+; Check -1.
+define void @f5(i8 *%ptr) {
+; CHECK-LABEL: f5:
+; CHECK: mvi 0(%r2), 255
+; CHECK: br %r14
+  store i8 -1, i8 *%ptr
+  ret void
+}
+
+; Check the low end of the signed range.
+define void @f6(i8 *%ptr) {
+; CHECK-LABEL: f6:
+; CHECK: mvi 0(%r2), 128
+; CHECK: br %r14
+  store i8 -128, i8 *%ptr
+  ret void
+}
+
+; Check the next value down.
+define void @f7(i8 *%ptr) {
+; CHECK-LABEL: f7:
+; CHECK: mvi 0(%r2), 127
+; CHECK: br %r14
+  store i8 -129, i8 *%ptr
+  ret void
+}
+
+; Check the high end of the MVI range.
+define void @f8(i8 *%src) {
+; CHECK-LABEL: f8:
+; CHECK: mvi 4095(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 4095
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the next byte up, which should use MVIY instead of MVI.
+define void @f9(i8 *%src) {
+; CHECK-LABEL: f9:
+; CHECK: mviy 4096(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 4096
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the high end of the MVIY range.
+define void @f10(i8 *%src) {
+; CHECK-LABEL: f10:
+; CHECK: mviy 524287(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 524287
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the next byte up, which needs separate address logic.
+; Other sequences besides this one would be OK.
+define void @f11(i8 *%src) {
+; CHECK-LABEL: f11:
+; CHECK: agfi %r2, 524288
+; CHECK: mvi 0(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 524288
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the high end of the negative MVIY range.
+define void @f12(i8 *%src) {
+; CHECK-LABEL: f12:
+; CHECK: mviy -1(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 -1
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the low end of the MVIY range.
+define void @f13(i8 *%src) {
+; CHECK-LABEL: f13:
+; CHECK: mviy -524288(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 -524288
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check the next byte down, which needs separate address logic.
+; Other sequences besides this one would be OK.
+define void @f14(i8 *%src) {
+; CHECK-LABEL: f14:
+; CHECK: agfi %r2, -524289
+; CHECK: mvi 0(%r2), 42
+; CHECK: br %r14
+  %ptr = getelementptr i8 *%src, i64 -524289
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check that MVI does not allow an index.  We prefer STC in that case.
+define void @f15(i64 %src, i64 %index) {
+; CHECK-LABEL: f15:
+; CHECK: lhi [[TMP:%r[0-5]]], 42
+; CHECK: stc [[TMP]], 4095({{%r2,%r3|%r3,%r2}}
+; CHECK: br %r14
+  %add1 = add i64 %src, %index
+  %add2 = add i64 %add1, 4095
+  %ptr = inttoptr i64 %add2 to i8 *
+  store i8 42, i8 *%ptr
+  ret void
+}
+
+; Check that MVIY does not allow an index.  We prefer STCY in that case.
+define void @f16(i64 %src, i64 %index) {
+; CHECK-LABEL: f16:
+; CHECK: lhi [[TMP:%r[0-5]]], 42
+; CHECK: stcy [[TMP]], 4096({{%r2,%r3|%r3,%r2}}
+; CHECK: br %r14
+  %add1 = add i64 %src, %index
+  %add2 = add i64 %add1, 4096
+  %ptr = inttoptr i64 %add2 to i8 *
+  store i8 42, i8 *%ptr
+  ret void
+}